Deep Groove Ball Bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 95 mm x 170 mm x 32 mm SKF 6219-2Z/VA201 deep groove ball bearings
- 12000 fpm
- Ambient
- Toyana Bo15 deep groove ball bearings
- 5.8750 in
- 0.25 lb
- AST F689H-2RS deep groove ball bearings
- 47.60 KGS
- In Stock
- 15 mm x 35 mm x 11 mm NACHI 6202ZENR deep groove ball bearings
- 47.60 KGS
- In Stock
- 140 mm x 190 mm x 24 mm NSK 6928NR deep groove ball bearings
- 1.0000 in
- Open
- 4,762 mm x 12,7 mm x 3,967 mm NMB RF-3 deep groove ball bearings
- Spherical Roller
- Lubrication Fitting
- 15,000 mm x 35,000 mm x 15,875 mm NTN 63202ZZ deep groove ball bearings
- Cylindrical Rollers
- ANSI/ABMA Stand
- 50 mm x 90 mm x 49,21 mm Timken GE50KPPB3 deep groove ball bearings
- 47.60 KGS
- In Stock
